Sponsored Links
-->

Thursday, February 22, 2018

Buyers' Guide: 10 Best Gates Carbon Belt Drive Bikes - Bikesoup
src: magazine.bikesoup.com

A belt-driven bicycle is a chainless bicycle that uses a toothed synchronous belt to transmit power from the pedals to the wheel. The belts are typically made by the same manufacturing companies that produce timing belts for automobiles, machinery, and other synchronous belt-drive applications.

The application of belt drives to bicycles is growing, especially in the commuter bicycle market, due to the low maintenance and lubrication-free benefits. Belt drives are also available for stationary and fitness bicycles.


Video Belt-driven bicycle



Benefits

  • Belts do not rust.
  • Lubrication is not required.
    • Cleanliness due to lack of lubrication.
    • Little to no maintenance.
  • Smoother operation.
  • Quieter than chain.
  • Longer life than metal bicycle chains.
  • Some belt systems are lighter than conventional chain-driven system.

Maps Belt-driven bicycle



Drawbacks

  • Derailleurs cannot be used, so an internal-gear hub is used if multiple gear ratios are required.
  • The belt cannot be taken apart as a chain can, so a frame must be able to accommodate the belt by having an opening in the rear triangle or an elevated chain stay.
  • Belts come in limited selection of lengths, which must be accommodated in the design of the frame.
  • Belt-driven bicycles and their repair or replacement parts are scarcer at shops than bicycles with conventional chain.
  • Front and rear pulleys or sprockets must be well aligned to avoid excessive friction and wear. A chain is more flexible in this respect.
  • Compared to a chain, belts are typically run at a much higher tension. This is done in order to avoid skipping of the belt while in use. However, high belt tensions can reduce the life expectancy of the bearings in the bottom bracket, as well as in the rear hub.
  • First-generation pulleys with dual guides had problems with snow becoming compacted and trapped in the pulley (up to complete inoperability in some cases). Second generation (one guide, wheel side) and third generation (center guide) improve upon the design.

Eliminating the Chain with Belt-Driven Bikes | Outside Online
src: www.outsideonline.com


History

A belt drive for a bicycle was patented in the United States on April 8, 1890 by Charles D. Rice, Patent # 425,390. No evidence has been found that it was ever used, but some motorcycles used leather belts in the early 1900s. The Bridgestone Picnica belt-drive bicycle was introduced in the early 1980s. It used a tooth-belt drive like auto timing belts and Harley-Davidson drive belts, along with a novel two-part chainring that increased belt tension with increasing load. The Picnica was a folding bicycle, and part of the appeal of the belt drive was cleanliness. The Picnica was a small-wheel bicycle, so belt tension may have been less than on a bicycle with standard-size wheels. It was apparently successful, but was offered mainly in Japan.

Bridgestone offered belt-drive bicycles in the USA until they left the market about 1994. Since their innovation, they have continuously offered belt-drive bicycles in Japan including their best-selling Albelt model.

In 1984 and 1985, Mark Sanders, a designer who had earned his degree in mechanical engineering from Imperial College, London, designed a folding bicycle as part of his graduate studies in an Industrial Design Engineering (IDE) program. The program was run jointly by Imperial College and the Royal College of Art in London. He collaborated with a design engineer from Gates Corporation to outfit his bicycle with a belt, rather than a chain.

When his project was complete, Sanders chose entrepreneur and former Greg Norman manager James Marshall and a Glasgow manufacturer to turn his award-winning design into a product. The manufacturer coined the name STRiDA, and in 1987 the bicycle began rolling off the production line. In 2002 production was moved to Taiwanese manufacturer Ming Cycle in order to meet increased demand, and as of 2007, Ming Cycle fully owned the STRiDA brand and intellectual property rights.

iXi bicycles, distributed in the United States by Delta Cycle Corporation, followed in 2004 with a compact design that, like STRiDA, featured a belt drive. Other folding-bike manufacturers that have implemented a belt drive include U.S. company Bike Friday and Netherlands-based Bernds.

In 2007, Gates Corporation developed a high-modulus synchronous belt and sprocket system called the Carbon Drive System. The belt's pitch allowed for lower tension requirements to help prevent skipping. Lightweight, patent-pending sprockets have mud ports, openings under each tooth, which work to slough off debris.

In 2009, an increasing number of bicycle companies, including Trek and f8 Cycles, offered belt-driven bicycles. While builders initially focused on single-speeds and internal hubs, in early 2009 f8 used a Gates-compatible fixed-gear cog designed by Phil Wood & Co., offering a belt-driven fixed-gear bicycle.

In 2009, Wayne Lumpkin, owner of Spot Brand and best known as the founder of Avid, designed a belt system called CenterTrack. In 2010, Gates Corporation acquired a patent from Lumpkin for CenterTrack, a new belt-and-pulley design that improves on the initial Carbon Drive System design. CenterTrack is more tolerant to misalignment than its predecessors. It is also lighter, 20% stronger due to a wider belt, yet has narrower pulleys, making packaging with the latest generation of internally geared hubs much easier.

In 2010, Daimler introduced the Smart eBike, a power-electric hybrid bicycle featuring Gates Carbon drive-belt system. The eBike is emission-free and is designed for a clean, grease-free ride. Other notable eBike brands include Grace and Pi-Mobility.

The possibilities for belt-driven bicycles are increasing as manufacturers of internal gear hubs (gears inside the rear hub, which allow riders of belt-driven bicycles to shift easily) are constantly innovating and introducing new designs such as the Shimano Alfine 11 and Fallbrook Technologies's NuVinci. Other major internally geared hub makers include SRAM, Sturmey-Archer and Rohloff.

Another option to provide gears is using a bracket-mounted gearbox like the Pinion P.18.


Priority Bicycles offers new belt drive bike retailing for $800 ...
src: www.bicycleretailer.com


Manufacturers

Notable manufacturers of belt-driven bicycles or belt drives include:

  • Avanti
  • BMC Trading -- Lifestyle models Urban Challenge and Mass Challenge
  • Bridgestone -- Albelt, Beltrex
  • Canyon
  • Co-Motion Cycles -- Americano, Pangea, CityView and Speedster (tandem) bicycle models
  • Continental AG -- CONTI® DRIVE SYSTEM (CDS) belt drives and sprockets
  • Cycle Union
  • Daimler - Smart eBike creators featuring Gates belt drive
  • Diamant
  • Focus Bikes
  • Gates Corporation -- sprockets and carbon fiber reinforced polyurethane belt drives
  • Ikea -- Sladda
  • Kalkhoff - Voyager De Luxe model and Endeavour 8 Gates
  • Priority Bicycles - Priority Classic & Priority 8
  • Raleigh
  • Scott
  • Specialized -- Source Eleven model
  • Strida -- a portable, folding bicycle
  • Trek Bicycle Company -- District and Soho bicycle models. Also under the Villager brand.

How To Install Whizzer Drive Belt Sheave Motorized Bicycle - YouTube
src: i.ytimg.com


See also

  • Chainless bicycle
  • Outline of cycling

Eurobike: Ibis doesn't debut 2015 long-travel enduro bike - Mtbr.com
src: reviews.mtbr.com


References


The Monkey Lab: Rohloff-Equipped, Belt Driven Independent ...
src: 2.bp.blogspot.com


External links

  • BikeCAD modeling a chain or belt drive.

Source of the article : Wikipedia

Comments
0 Comments